CLASSIC JAGUAR BRAKE CONVERSION KITS
Braking in an emergency on classic Jaguars was always a hit & miss affair. The original Dunlop/Girling piston cylinders never provided the quality of braking that classic Jaguars needed.
Our conversion kits give you increased braking pressure and will therefore make your classic Jaguar stop faster for today’s driving conditions.
CLASSIC JAGUAR NON-VENTED FRONT BRAKE KIT
This 4 pot conversion kit fits straight on to your suspension uprights without any modification, utilising the original solid brake discs and brake hoses. This is a quick and easy conversion to fit and is supplied complete with brake pads.
It gives a 90% larger pad area, stainless steel pistons and a modern seal design. These kits include a pair of new 4 pot calipers and a set of pads with pipes where applicable.
Cast Iron Front conversion kit E-TYPE S1/E-TYPE S1 1/2/MK1/MK2/S-TYPE/DAIMLER V8/XK150 £410 + VAT
Billet aluminium non-vented front brake kit E-TYPE S1/E-TYPE S1 1/2/E-TYPE S2/MK1/MK2/S-TYPE/DAIMLER V8/XK150/420 £425 + vat
CLASSIC JAGUAR VENTED FRONT BRAKE KIT
We recommend this upgrade for the more enthusiastic driver as the vented discs create more efficiency under increasingly arduous use. These brakes will take track days or mountain work in their stride and will transform the braking performance and feel of the car.
Cast iron front brake kit E-TYPE S1/E-TYPE S1 1/2/MK2/S-TYPE/DAIMLER V8 £600 + vat
Billet aluminium vented brake kit E-TYPE S1/E-TYPE S1 1/2/E-TYPE S2/MK2/S-TYPE/DAIMLER V8/420 £650 + vat
CLASSIC JAGUAR FRONT DRUM TO DISC CONVERSION
This system has been exclusively designed to replace the original drum brakes fitted to early XK’s and saloons. It is easily fitted with no modifications necessary and is compatible with the standard hydraulic system. This allows the discerning classic Jaguar driver to experience a dramatic transformation in the feel and response of their car. The calipers are available in top quality zinc-plated cast iron or aero specification billet aluminium for increased performance
This high performance brake kit will convert your front drum brakes to our up-rated disc system, fits wire or steel wheels and includes:
2 new cast-iron or billet aluminium 4-piston calipers
2 steel caliper mounting plates
2 XK 150 discs
2 front wire wheel (or steel wheel) hubs as applicable
2 stainless steel braided flexi hose pipes
1 set of fittings (not shown)
1 set of brake pads
1 set of brake pad retaining pins and clips
XK120 £1045.00 + vat BUY NOW
XK140 £1045.00 + vat BUY NOW
MK5 £1045.00 + vat BUY NOW
MK7 £1045.00 + vat BUY NOW
MK8 – £1045.00 + vat BUY NOW
CLASSIC JAGUAR REAR PISTON CYLINDER UPGRADE
This brake kit has been designed to replace the original Dunlop cylinder assemblies, easily fitted to the original carriers and retaining your original handbrake mechanism. The cylinders incorporate a modern style seal and piston and are designed to work in conjunction with our uprated front brake kits.
They are available in steel with a smart zinc plated finish and stainless steel pistons as shown below.
E-TYPE S1/E-TYPE S1 1/2/MK1/MK2/XK150 £375 + VAT
Anodised billet aluminium cylinders and pistons for competition use as shown below
E-TYPE S1/E-TYPE S1 1/2/MK1/MK2/XK150 £385 + VAT BUY NOW
CLASSIC JAGUAR MK2/DAIMLER V8 REAR BRAKE CONVERSION KIT
Upgrade your rear brakes to a later 2 pot cast iron caliper which is a direct replacement for the unreliable original piston and cylinder assemblies. These calipers retain your original handbrake mechanisms and use a later rear pad which is supplied along with the pins & clips.
RRP £475 + vat Special offer £425.00 + vat BUY NOW
CLASSIC JAGUAR VENTED REAR BRAKE CONVERSION KIT
Our new vented disc conversion tremendously reduces rear brake fade due to heat dissipation and uses XJS pads. Output shaft oil seals are subjected to less heat damage and will have a longer life. Used on 6-cylinder E-Types in conjunction with our front vented disc conversion the transformation is extraordinary.
The conversion kit includes 2 vented brake discs, 2 reconditioned calipers, 10 disc nuts, 2 handbrake adjuster screws and bronze forks
E-TYPE S1/S2/S3 and IRS inboard disc models £645 + vat BUY NOW
PLEASE NOTE: PHOTOGRAPHS USED ARE FOR ILLUSTRATION PURPOSES ONLY. PRICES ARE ALSO SUBJECT TO CHANGE.